Description

The Jungheinrich EJC M10b E wide-track electric stacker truck was developed specifically for occasional use as part of your in-house goods transport. The electric stacker truck is suitable for handling loads weighing up to 1000 kg and stacking pallets up to heights of 1900 mm. The mono mast also makes it an ideal tool for order picking. In its standard configuration, the wide-track version can accommodate pallets up to 882 mm in width. The distance between the support arms can be further increased up to 1252 mm using optional adapters, which are available separately.

  • Straddle arm version for closed pallets
  • Choice of 1540 or 1900 mm lift height
  • Powerful three-phase AC drive motor
  • Maintenance-free lead-gel battery and on-board charger

Wide-track version - for flexible handling of both Euro pallets and closed boarded pallets

Enjoy a cost-effective entry into the Jungheinrich electric stacker truck segment. The EJC M10b E was developed specifically for in-house goods transport and for use in small and medium-sized businesses with occasional need for a goods transport solution. The 0.6 kW drive motor assists you in transporting pallets and goods weighing up to 1000 kg. The wide-track stacker offers lift heights of 1540 or 1900 mm for straightforward pallet stacking. In addition, the mono mast makes the electric stacker truck an excellent order picker.

The support arms are extended at the sides in order to surround the pallet. The forks can be lowered fully to the floor and pallets can be lifted freely without the forks and support arms getting trapped between closed pallet boards as with conventional stacker trucks. You can then pick up Euro or UK closed pallets just like with a counterbalanced stacker.

Support arms under the forks          Support arms at the sides

In its standard configuration, the stacker truck can handle pallets up to 882 mm in width. You also have the option of extending the distance between the support arms up to 1252 mm to accommodate different load and pallet sizes. The relevant modifications are available from our shop as accessories.

The ergonomic tiller handle can be operated with either hand and is very user-friendly. You control all lifting and lowering functions via the multifunction tiller head, thus allowing you to devote your full attention to the task at hand. All important control instruments, such as the battery charge indicator, hour meter, emergency disconnect and key are positioned centrally in your direct field of view.

Thanks to its compact design and short headlength, the pallet lifter is extremely agile and can be used safely in even the tightest of spaces. Even with the tiller raised, you can manoeuvre the truck easily and safely in cramped environments thanks to the crawl speed button. The low ground clearance greatly reduces the risk of foot injuries. The full panelling of the truck housing provides additional protection.

Thanks to the low frame height of the EJC M10b E, even smaller operators have a clear view of the fork tips. The single stage mast also provides an unobstructed view, making the electric stacker truck simple and safe to operate.

The powerful, maintenance-free three-phase AC motor reduces your operating costs and assists you in maximising the speed and cost efficiency of your stock turnover. The 0.6 kW drive motor delivers pleasantly swift acceleration and excellent handling. Efficient energy management is supported by the regenerative brake with energy recovery when reducing the travel speed.

   

The truck switches off automatically when not used for 30 minutes. This intelligent automatic shut-off helps to protect the battery. Thanks to the on-board charger, the maintenance-free lead-gel battery can be easily charged via any standard 230 V socket.

 

Model
Jungheinrich EJC M10b E
Drive
Electric
Operator type
Pedestrian
Capacity
1000 kg
Load centre
600 mm
Net weight incl. battery
602 kg (E 1540)
620 kg (E 1900)
Mast
Mono mast
Mast height (retracted-extended mast height)
1935 - 2125 mm (E 1540)
2295 - 2335 mm (E 1900)
Lift (h3)
1540 mm
1900 mm
Free lift
1350 mm (E 1540)
1710 mm (E 1900)
Lift range
85 - 1540 mm
85 - 1900 mm
Tiller height
740 mm
Overall length
1664 mm
Face of forks length
514 mm
Overall width
800 - 1042 mm
Fork height
40 mm
Fork width
100 mm
Fork support width
316 - 706 mm
Support arms inside clearance
882 mm
Support arms outer distance
1042 mm
Ground clearance
35 mm
Aisle width
2100 mm (pallet 800x1200 length)
2163 mm (pallet 1000x1200 sideways)
Turning radius
1325 mm
Drive motor power
0,6 kW
Travel speed, laden/unladen
4,5 / 5 km/h
Lift motor output
2,2 kW
Lift speed with/without load
0,12 / 0,22 m/s
Lowering speed with/without load
0,15 / 0,12 m/s
Max. gradeability laden/unladen
4 / 10 %
Brake
Electric
Battery type
Lead gel battery
Battery voltage
24 V/per unit
Battery capacity
85 Ah/per unit
Battery weight
49 kg
Swivel castor diameter
230 mm
Swivel castor width
65 mm
Fork roller material
Polyurethane (PU)
Fork roller diameter
100 mm
Fork roller width
50 mm
Fork roller equipment
Single
Additional wheel width
50 mm
Spare wheel diameter
80 mm
Charger
Integrated
Tiller surface
Powder-coated
Noise level as per EN 12053 (operator's ear)
66 dB(A)
Drive control type
AC speed control
Material
Steel
Chassis surface
Powder-coated
Colour chassis
Jungheinrich yellow

Jungheinrich EJC M10b E, single stage mast, with straddle arms, capacity 1000 kg

Ideal for occasional use as part of your in-house goods transport, occasional stacking and order picking

  • Straddle arm version for handling closed pallets
  • Powerful three-phase AC drive motor
  • Awailable with lift height 1540 or 1900 mm

€5,150.00
Tax excluded
198215-51668002
Status: Out of stock

Delivery: E 1540mm: In 9-10 weeks // E 1900mm: In 15-16 weeks
SECURE Payment options